www.Minneapolis-Moline.com

[LexWed Jan 29, 2020 5:21 am]

does anyone know how much oil goes in the hub cap of a g706 4wd diesel?

[RLRWed Dec 04, 2019 5:45 pm]

Hi Folks, I have an antique Minneapolis Moline straw hat I'd like to sell, but I'm not sure of a fair price to put on it. Can someone give me a good idea of a fair price. It is in good condition with good colors in the Red print, yellow outside and green inside. It even has the original price tag on it. It does have damage to the straw in the front of the hat but otherwise is in very good condition and even has the original string for the neck. Please respond back if you have an idea. Thank you for your help.

[Belarus400aTue Sep 10, 2019 10:15 am]

Does anyone know where the serial number plate is on a moline v tractor?

[applewranglerMon Jun 10, 2019 11:16 am]

I have several 335's and have only one good fiber speedo drive gear. Have heard somebody had made some of those. Is that correct? Does anybody have their contact information?

[Betobob1012Sun Feb 17, 2019 9:38 am]

Me again, planning to change water pump, appears the fan spacer/hub is pressed on shaft of pump. If i'm correct, let me know. Will have to find a shop with a press.

[Betobob1012Sun Feb 17, 2019 9:33 am]

My mm445 is loosing coolant. Has the 206H engine. Water pump has some play in shaft but not leaking, new radiator, no leaks anywhere no water in oil, runs like a top. Any ideas?

[Maarten PleiterTue Aug 14, 2018 1:38 pm]

If anyone has a belt pulley for sale for a MF 97, please let me know

[Maarten PleiterSun Jun 24, 2018 7:17 am]

Wanted, clutch brass collar for a MF 97

[corncob2016Thu Jan 04, 2018 2:57 pm]

Looking for Hyd coupers for a Jet Star 2 It is a bareback No 3 point

[jetstarReviverFri Nov 10, 2017 11:57 am]

Hello, I registered to this forum last week and submitted a post to ask a question regarding my Jetstar 3's throttle linkages. However, I do not see it appearing and have no means of contacting the admins to see if they reviewed and approved my post (it is my first). I am locked out of PM due to being a new user. Can someone help me contact the site admin regarding my submital please? Thank you! -jetstarReviver

[eidetermanThu Aug 24, 2017 8:54 pm]

Hi I am looking for a Grill emblem for an RTE i know they are very hard to find. dose any one know where i might find a reproduction?

[MxM.WISun Jul 23, 2017 7:20 am]

Reply for Yankeeswagman. At the time your tractor was made, Moline offered 3 choices for transmissions. The tractor could be ordered with or without the Ampli-torq, or it could be ordered with the shuttle..

[yankeeswagmanWed Jun 07, 2017 6:22 am]

this site dosen't look very busy, i just bought an 1960's something big mo L500, someone was telling me it supposedly has a high and low range, but it looks like it just has a regular shuttle shift type shifting , there is a forward and reverse leaver on the left side also there is reverse on the shuttle shift.. I don't notice any indication it has a low range, could someone please explaine, thanks Matt,

[tractorRfunTue Jun 06, 2017 3:16 pm]

I recently aquired an MM670. Loving it so far. I am having an issue with it. when i try to start it it it spits and sputters and will even give a back fire and then engine stops. one of things that i want to check id the engine timing, can anyone tell me how toi check the timing on it? it a gas engine. at this point i dont think its fuel issue, but i could be wrong. Thanks

[ROBINSun May 21, 2017 2:41 am]

HI JUST GOT A 1940 RTU ,ON THELEFT SIDE SITTING ON TRACTOR IS A LARGE PLATE WHERE CRANK WOULD COME OUT LOOKING AT THIS PLATE TO THE RIGHT IS SOME VALUE LOOKING THING WITH A ROD GOING UP TO A LEAVER JUST UNDER THE STEERING SHAFT WITH SOME WRITING ON IT THAT I CAN NOT READ . ANYBODY KNOW WHAT THIS IS FOR THANKS AND ALL THE BEST FROM THE UK

[shiftingshellTue Mar 28, 2017 12:54 pm]

I have a 1948 utu. Am looking for any information a adapter to switch the oil filter over to a more common filter. Any leads or part numbers or such are appreciated . Thanks

[Kenny S.Mon Sep 26, 2016 1:56 pm]

I am looking for a seeding chart for a minneapolis-moline pf3-7 grain drill. Can anyone help?

[jasondWed Sep 14, 2016 6:24 pm]

I'm looking for a starter for my 52 BF sarter #1109609 or is there a different starter that would work?

[MymolineMon Sep 05, 2016 12:32 pm]

Hello gents. My name is Nolen and I've recently acquired a skytrak 710 on a moline. I need to work on the brakes and need some literature. Can't find free lit online. I understand there are 3 or 4 books. Any suggestions

[MolinemanFri Aug 26, 2016 2:11 pm]

Looking for a good set of fenders for a early G900

[PeterFri Aug 19, 2016 6:50 am]

U302 hydraulic teloflo parts Does anyone have these parts for sale or know where I can buy them? I need in valve sleeve and spool assembly and spool control fork, and one linkage tube

[MoonfarmsTue Jul 26, 2016 2:39 pm]

I'm looking for a roosa master injection pump to fit my 1965 g707 MM, ready to go or rebuildable ok.

[medic2910Tue Jul 19, 2016 9:54 am]

I have a 1961 MM Jet Star, I'm looking for a battery tray. Where can I find one?

[guyTue May 24, 2016 3:34 pm]

I have a 1964 MM Big MO 500 tractor/loader. It broke the crankshaft and wiped out the center main in the block, so the block is junk. The tractor is a parts tractor now. Anyone interested, I'm located in San Jose CA.

[MxM.WISun Apr 17, 2016 6:22 pm]

A message for Gary Harper. A week ago on ebay there was a guy selling alot of parts from bf. He should be on there yet, if not, let me know, my cousin bought the fenders he was selling.