www.Minneapolis-Moline.com

HI - I give up. i will not be checking here anymore to see if my posts actually came through - if you do decide to le tme post please contact me via email. - Sorry this looked like an excellent site to help with my waterloo MM U restoration. Goodbye John

Hi - John Janssen here, CAn_redneck. john@itsn.ca I have tried posting but nothign comes through - am I being blocked? Is this forum still active?

Hello. First time on. I am a hobby restoration guy. I have a 1955 in propane powered that was just completed and looking at my 6th project and second Minneapolis moline tractor. I am unsure of this model and availability of parts and would like some help. It is a mostly complete tractor and comes with a parts tractor of similar vintage. Cast on side is UT 100 D. The plate has model 4-1/4x5283A4 and an 0194904352. Dual wheel tricycle Any help would be appreciated. I have such a hard time seeing these waste away as they have been parked fir about 14 years and are going to need work that I am happy to do. Thank you

How do I post pictures? I have a MM Grain Drill that I would like to sell but I can't post pictures.

G1355 shift pattern - any one know where i can find the shifting pattern for this tractor?

The MM registry Brian Rukes put together shows a # 377 on it. He also notes on there #375 was the last. I don't know.

I own a 1949 RTS serial# 0024900399 however all references to serial numbers claim the last one built in 1949 carried serial # 0024900375. Mine is 24 after. Anyone know why? Thanks

Applewrangler states, "I have several 335's . . . " I have one. In my search for part, wondering how interchangeable are parts between the335 and 445s? (Such as sheet metal, grill, exhaust manifold)

I have an M5 that was loaned to a friend several years ago. It ran perfectly. Now it's been sitting so long it has frozen up and I need to get it running again. I think the cylinders are rusted tight. Can I just take some Marvel Mystery Oil and put it in each cylinder and let it sit overnight, then try to turn the crank on the nut up front back and forth ? Is that the best way or does anyone have a better idea ?

I have A M-M model V that I am looking for air cleaner parts. The air cleaner cup with baffle, the clamp, the cap in the intake stack. Also the correct size decals . Thanks, terry

does anyone know how much oil goes in the hub cap of a g706 4wd diesel?

Hi Folks, I have an antique Minneapolis Moline straw hat I'd like to sell, but I'm not sure of a fair price to put on it. Can someone give me a good idea of a fair price. It is in good condition with good colors in the Red print, yellow outside and green inside. It even has the original price tag on it. It does have damage to the straw in the front of the hat but otherwise is in very good condition and even has the original string for the neck. Please respond back if you have an idea. Thank you for your help.

Does anyone know where the serial number plate is on a moline v tractor?

I have several 335's and have only one good fiber speedo drive gear. Have heard somebody had made some of those. Is that correct? Does anybody have their contact information?

Me again, planning to change water pump, appears the fan spacer/hub is pressed on shaft of pump. If i'm correct, let me know. Will have to find a shop with a press.

My mm445 is loosing coolant. Has the 206H engine. Water pump has some play in shaft but not leaking, new radiator, no leaks anywhere no water in oil, runs like a top. Any ideas?

If anyone has a belt pulley for sale for a MF 97, please let me know

Wanted, clutch brass collar for a MF 97

Looking for Hyd coupers for a Jet Star 2 It is a bareback No 3 point

Hello, I registered to this forum last week and submitted a post to ask a question regarding my Jetstar 3's throttle linkages. However, I do not see it appearing and have no means of contacting the admins to see if they reviewed and approved my post (it is my first). I am locked out of PM due to being a new user. Can someone help me contact the site admin regarding my submital please? Thank you! -jetstarReviver

Hi I am looking for a Grill emblem for an RTE i know they are very hard to find. dose any one know where i might find a reproduction?

Reply for Yankeeswagman. At the time your tractor was made, Moline offered 3 choices for transmissions. The tractor could be ordered with or without the Ampli-torq, or it could be ordered with the shuttle..

this site dosen't look very busy, i just bought an 1960's something big mo L500, someone was telling me it supposedly has a high and low range, but it looks like it just has a regular shuttle shift type shifting , there is a forward and reverse leaver on the left side also there is reverse on the shuttle shift.. I don't notice any indication it has a low range, could someone please explaine, thanks Matt,

I recently aquired an MM670. Loving it so far. I am having an issue with it. when i try to start it it it spits and sputters and will even give a back fire and then engine stops. one of things that i want to check id the engine timing, can anyone tell me how toi check the timing on it? it a gas engine. at this point i dont think its fuel issue, but i could be wrong. Thanks

HI JUST GOT A 1940 RTU ,ON THELEFT SIDE SITTING ON TRACTOR IS A LARGE PLATE WHERE CRANK WOULD COME OUT LOOKING AT THIS PLATE TO THE RIGHT IS SOME VALUE LOOKING THING WITH A ROD GOING UP TO A LEAVER JUST UNDER THE STEERING SHAFT WITH SOME WRITING ON IT THAT I CAN NOT READ . ANYBODY KNOW WHAT THIS IS FOR THANKS AND ALL THE BEST FROM THE UK

www.Minneapolis-Moline.com

www.Minneapolis-Moline.com Chat Center

Who is online