www.Minneapolis-Moline.com

[Maarten PleiterTue Aug 14, 2018 1:38 pm]

If anyone has a belt pulley for sale for a MF 97, please let me know

[Maarten PleiterSun Jun 24, 2018 7:17 am]

Wanted, clutch brass collar for a MF 97

[corncob2016Thu Jan 04, 2018 2:57 pm]

Looking for Hyd coupers for a Jet Star 2 It is a bareback No 3 point

[jetstarReviverFri Nov 10, 2017 11:57 am]

Hello, I registered to this forum last week and submitted a post to ask a question regarding my Jetstar 3's throttle linkages. However, I do not see it appearing and have no means of contacting the admins to see if they reviewed and approved my post (it is my first). I am locked out of PM due to being a new user. Can someone help me contact the site admin regarding my submital please? Thank you! -jetstarReviver

[eidetermanThu Aug 24, 2017 8:54 pm]

Hi I am looking for a Grill emblem for an RTE i know they are very hard to find. dose any one know where i might find a reproduction?

[MxM.WISun Jul 23, 2017 7:20 am]

Reply for Yankeeswagman. At the time your tractor was made, Moline offered 3 choices for transmissions. The tractor could be ordered with or without the Ampli-torq, or it could be ordered with the shuttle..

[yankeeswagmanWed Jun 07, 2017 6:22 am]

this site dosen't look very busy, i just bought an 1960's something big mo L500, someone was telling me it supposedly has a high and low range, but it looks like it just has a regular shuttle shift type shifting , there is a forward and reverse leaver on the left side also there is reverse on the shuttle shift.. I don't notice any indication it has a low range, could someone please explaine, thanks Matt,

[tractorRfunTue Jun 06, 2017 3:16 pm]

I recently aquired an MM670. Loving it so far. I am having an issue with it. when i try to start it it it spits and sputters and will even give a back fire and then engine stops. one of things that i want to check id the engine timing, can anyone tell me how toi check the timing on it? it a gas engine. at this point i dont think its fuel issue, but i could be wrong. Thanks

[ROBINSun May 21, 2017 2:41 am]

HI JUST GOT A 1940 RTU ,ON THELEFT SIDE SITTING ON TRACTOR IS A LARGE PLATE WHERE CRANK WOULD COME OUT LOOKING AT THIS PLATE TO THE RIGHT IS SOME VALUE LOOKING THING WITH A ROD GOING UP TO A LEAVER JUST UNDER THE STEERING SHAFT WITH SOME WRITING ON IT THAT I CAN NOT READ . ANYBODY KNOW WHAT THIS IS FOR THANKS AND ALL THE BEST FROM THE UK

[shiftingshellTue Mar 28, 2017 12:54 pm]

I have a 1948 utu. Am looking for any information a adapter to switch the oil filter over to a more common filter. Any leads or part numbers or such are appreciated . Thanks

[Kenny S.Mon Sep 26, 2016 1:56 pm]

I am looking for a seeding chart for a minneapolis-moline pf3-7 grain drill. Can anyone help?

[jasondWed Sep 14, 2016 6:24 pm]

I'm looking for a starter for my 52 BF sarter #1109609 or is there a different starter that would work?

[MymolineMon Sep 05, 2016 12:32 pm]

Hello gents. My name is Nolen and I've recently acquired a skytrak 710 on a moline. I need to work on the brakes and need some literature. Can't find free lit online. I understand there are 3 or 4 books. Any suggestions

[MolinemanFri Aug 26, 2016 2:11 pm]

Looking for a good set of fenders for a early G900

[PeterFri Aug 19, 2016 6:50 am]

U302 hydraulic teloflo parts Does anyone have these parts for sale or know where I can buy them? I need in valve sleeve and spool assembly and spool control fork, and one linkage tube

[MoonfarmsTue Jul 26, 2016 2:39 pm]

I'm looking for a roosa master injection pump to fit my 1965 g707 MM, ready to go or rebuildable ok.

[medic2910Tue Jul 19, 2016 9:54 am]

I have a 1961 MM Jet Star, I'm looking for a battery tray. Where can I find one?

[guyTue May 24, 2016 3:34 pm]

I have a 1964 MM Big MO 500 tractor/loader. It broke the crankshaft and wiped out the center main in the block, so the block is junk. The tractor is a parts tractor now. Anyone interested, I'm located in San Jose CA.

[MxM.WISun Apr 17, 2016 6:22 pm]

A message for Gary Harper. A week ago on ebay there was a guy selling alot of parts from bf. He should be on there yet, if not, let me know, my cousin bought the fenders he was selling.

[Gary harperSun Mar 20, 2016 7:19 pm]

Looking for a seat for BG or bf moline

[Gary harperSun Mar 20, 2016 7:19 pm]

Looming g for a seat for BG are bf Moline

[SchachtWed Mar 16, 2016 6:37 am]

I am looking for a booklet on a MM rollover plow schacht1@frontiernet.net.

[HillFri Jan 29, 2016 7:15 pm]

I would also like to know of some salvage yards that carry moline stuff . There are no parts yards for moline here in Huntsville alabama

[HillFri Jan 29, 2016 7:05 pm]

Hi I would like to talk to someone about a 1937 mm ztu hand clutch it won't stay engaged , my radiator is in bad shape also , any response would be appreciated

[Too Many TractorsFri Jan 22, 2016 7:18 pm]

I am looking for a repair manual for a 1961 GVI. Does anyone have one at a reasonable price?