Tele flow experts

This is the place for all things Moline. This is a general forum with the best group of people in the world. Come join us.

Moderators: a31ford, Steve Sewell

Tele flow experts

Postby Murph » Sun Sep 08, 2019 7:53 am

Son bought a G900 yesterday and the 3 point arms won't come down. Any suggestions? TIA

G9002.jpg
G9002.jpg (135.01 KiB) Viewed 96 times


G9001.jpg
G9001.jpg (96.61 KiB) Viewed 96 times
M670 Super 2 UTU's ZAU ZTU RTU SH picker Model D Sheller Ford 4000 Case CC Farmall F20
User avatar
Murph
Sodbuster
 
Posts: 54
Joined: Tue Nov 29, 2005 5:10 pm
Location: Edison Ohio

Re: Tele flow experts

Postby MMDEL » Mon Sep 09, 2019 8:27 am

The two little levers directly under the seat. The left lever controls the rate of drop. If it is turned. all the way to the left the 3pt is locked up for transport position. For normal operation the lever is used in the straight ahead position. The right lever is to adjust the cycle rate for plowing. Most all leave both levers pointing straight ahead for general use.
MMDEL
MMDEL
Oldtimer
 
Posts: 626
Joined: Thu Jan 11, 2007 12:47 pm
Location: Franklin Grove, Ill.

Re: Tele flow experts

Postby Murph » Mon Sep 09, 2019 1:57 pm

I set the levers and it still wouldn't go down. After further investigation the arm with the roller that goes against the right arm was stuck. Popped it loose and everything works. Thanks for the help.
M670 Super 2 UTU's ZAU ZTU RTU SH picker Model D Sheller Ford 4000 Case CC Farmall F20
User avatar
Murph
Sodbuster
 
Posts: 54
Joined: Tue Nov 29, 2005 5:10 pm
Location: Edison Ohio


Return to Minneapolis-Moline Tractor Forum

Who is online

Users browsing this forum: Larry Mi. and 7 guests

cron