M602 diesel rear seal replacement

This is the place for all things Moline. This is a general forum with the best group of people in the world. Come join us.

Moderators: a31ford, Steve Sewell

M602 diesel rear seal replacement

Postby vecair » Fri Nov 13, 2020 2:30 pm

Time to replace the rear engine seal as the oil is coming out faster than I can pour it in:) Is it a rope seal or modern one piece? And advise on who to purchase it from? I know how to replace both so just looking for those answers or anything odd in doing it. Cheers!
vecair
Newbie
 
Posts: 2
Joined: Fri Dec 08, 2017 6:49 pm

Re: M602 diesel rear seal replacement

Postby shinnery » Sat Nov 14, 2020 12:45 am

I would probably start with Welters Farm Supply 417 498 6496 or check the parts sources page.
No trees were hurt in the creation of this message.
But, many electrons were terribly bothered.

UBU-LP, 445N-LP, 445E-LP, Big MO 400-M, 4 Star-LP, M5-D, M5-LP, M602-LP, M670-LP, G900-LP, G900-D, G1000 Vista-LP, Case 580CK, JD 440IC/602, 2-440ICD/831
User avatar
shinnery
Oldtimer
 
Posts: 542
Joined: Wed Mar 08, 2006 1:56 am
Location: Hawley, Texas

Re: M602 diesel rear seal replacement

Postby G Brown » Sun Nov 15, 2020 6:57 pm

Rope seal. Better than one piece as you don't have to split tractor. Not nice to change.
G Brown
Oldtimer
 
Posts: 694
Joined: Mon Nov 28, 2005 4:54 pm
Location: Melita MB

Re: M602 diesel rear seal replacement

Postby vecair » Sun Nov 15, 2020 7:06 pm

G Brown wrote:Rope seal. Better than one piece as you don't have to split tractor. Not nice to change.



Found all the parts at MolineParts.com with more modern gaskets, etc. Never done a MM rear seal but I never found replacing a rear seal in situ 'nice'. Would appreciate hearing your experience and any pitfalls to watch out for. Thanks
vecair
Newbie
 
Posts: 2
Joined: Fri Dec 08, 2017 6:49 pm

Re: M602 diesel rear seal replacement

Postby G Brown » Mon Nov 16, 2020 7:00 pm

You have to leave 1/8 on each end out after rolling seal into position. Many variations on models and shims. Agco or Felpro not good.
G Brown
Oldtimer
 
Posts: 694
Joined: Mon Nov 28, 2005 4:54 pm
Location: Melita MB


Return to Minneapolis-Moline Tractor Forum

Who is online

Users browsing this forum: No registered users and 6 guests