ZAS/LP throttle lever

[John Grandfield]

Anyone have one they could give measurements from? Mine must have one from a ZA, it' stoo long, hits the steering wheel on one end and the dash on the other.

[G Brown]

Lever same on gas? Three ZAS went scrap last week.

[John Grandfield]

there is a different part number for a standard LP than a standard. Don't know what the difference is, hoping someone would know, mine hits the dash on one end of travel and the steering wheel on the other. MM Del tells me his is just upside down on his LP but looks similar. I'm going to try that this morning

[MMDEL]

John I checked the difference is, the ZBS is a straight handle like all the other tractors and the ZBU, N, E is a bent handle.
MMDEL

[G Brown]

ZAS uses a 10A344 and crosses to 10A2230. All same according to books

[John Grandfield]

GB, since both those numbers appeared in the same book in the description I never bothered to see if they changed to the same number. Del looked at his and told me to turn mine upside down, it works that way. Thanks for all the replies